qh pqq

Titanium dioxide morning tips
1 Rutile type titanium dioxide
As of the close of last Friday, the average price of the sulfuric acid rutile titanium dioxide market assessment is 15683 yuan/ton, the domestic market mainstream negotiation reference 15200-16200 yuan/ton, the mainstream factory in hand orders are okay, coupled with the upstream raw materials expected to be strong, the new single offer to maintain a strong state, the market low price supply reduction.
According to the feedback of manufacturers, the recent mainstream factory new single price, the overall market transaction focus has moved up. On the demand side, the terminal in August is still the off-season, many downstream last month to replenish just need inventory, the current batch purchase intention is limited, the market turnover is low. From the supply side, the mainstream manufacturers still have production reduction or maintenance adjustment inventory in the off-season, and the supply side output is low. Some plastics and papermaking related downstream feedback some models have high prices. Recent titanium dioxide raw material price upward support has been enhanced, comprehensive market factors, the current titanium dioxide market into the stable price state after rising.
2 Anatase titanium dioxide
As of the close of last Friday, the average price of the domestic anatene titanium dioxide market was estimated at 13,000 yuan/ton, and the mainstream reference range for negotiation was mostly centered on 12,500-13,500 yuan/ton. The actual direct selling link price is still more reference in 13,000 yuan/ton. Some lower-priced producers offer even lower prices. On the demand side, because the current price is still relatively low, some downstream bargain purchasing. On the supply side, some manufacturers operate at low load or have maintenance plans. The comprehensive market supply and demand situation and the trend of raw material prices rise, the current market actual transaction price is stable and strong, some manufacturers of titanium diox

Titanium dioxide is considered safe for use in cosmetics products by expert bodies around the world, including Europe's Scientific Committee on Consumer Safety (SCCS) and the U.S. Food and Drug Administration (FDA). Nano grade titanium dioxide has been assessed by the SCCS and is approved by the European Commission for use as a UV filter.

Fig. 7. Lipid peroxidation measured on samples of MSSA with: A) 0.2 mg/mL P25TiO₂NPs; B) 0.02 mg/mL P25TiO₂NPs; C) 0.2 mg/mL VitaminB2@P25TiO₂NPs; D) VitaminB2@P25TiO₂NPs 0.02 mg/mL after 3 h of irradiation (red) and 6 h (blue). MDA could not be detected after 6 h of irradiation in a sample with P25TiO₂NPs. Error bars are too small to be seen in graphic and p < 0.05 between C-D and A-B.

Titanium dioxide (TiO₂) is considered as an inert and safe material and has been used in many applications for decades. However, with the development of nanotechnologies TiO₂ nanoparticles, with numerous novel and useful properties, are increasingly manufactured and used. Therefore increased human and environmental exposure can be expected, which has put TiO₂ nanoparticles under toxicological scrutiny. Mechanistic toxicological studies show that TiO₂ nanoparticles predominantly cause adverse effects via induction of oxidative stress resulting in cell damage, genotoxicity, inflammation, immune response etc. The extent and type of damage strongly depends on physical and chemical characteristics of TiO₂ nanoparticles, which govern their bioavailability and reactivity. Based on the experimental evidence from animal inhalation studies TiO₂ nanoparticles are classified as “possible carcinogenic to humans” by the International Agency for Research on Cancer and as occupational carcinogen by the National Institute for Occupational Safety and Health. The studies on dermal exposure to TiO₂ nanoparticles, which is in humans substantial through the use of sunscreens, generally indicate negligible transdermal penetration; however data are needed on long-term exposure and potential adverse effects of photo-oxidation products. Although TiO₂ is permitted as an additive (E171) in food and pharmaceutical products we do not have reliable data on its absorption, distribution, excretion and toxicity on oral exposure. TiO₂ may also enter environment, and while it exerts low acute toxicity to aquatic organisms, upon long-term exposure it induces a range of sub-lethal effects.

In a 2016 study published in Scientifica (Cairo), Egyptian researchers examined the effects of titanium dioxide nanoparticles on the organs of mice by orally administering the food additive daily, for five days. The results showed that the exposure produced “mild to moderate changes in the cytoarchitecture of brain tissue in a time dependent manner.” Furthermore, “Comet assay revealed the apoptotic DNA fragmentation, while PCR-SSCP pattern and direct sequencing showed point mutation of Presenilin 1 gene at exon 5, gene linked to inherited forms of Alzheimer’s disease.” The researchers wrote: “From these findings, “the present study concluded that TiO2NPs is genotoxic and mutagenic to brain tissue which in turn might lead to Alzheimer’s disease incidence.”

Following a request for assessment in 2020 by the EU, the European Food Safety Authority (EFSA) assessed E171, particularly for its genotoxicity. In 2022, the agency deemed the food additive no longer safe for use.  

Overall, titanium dioxide manufacturers play a crucial role in supplying this essential compound to industries around the world. By focusing on quality, sustainability, and innovation, manufacturers can ensure a stable supply of titanium dioxide for years to come.

Less frequently, we ingest E171 through liquids such as salad dressing, dairy products, and some artificially colored drinks. However, since E171 is insoluble, manufacturers must use other stabilizers to keep E171 suspended in liquids as an emulsion; otherwise, it will settle to the bottom. 

We know that there are a lot of suspended organisms and colloidal impurities in natural water. The forms of suspended solids are different. Some large particles of suspended solids can settle under their own gravity. The other is colloidal particles, which is an important reason for the turbidity of water. Colloidal particles can not be removed by natural settlement, because colloidal particles in water are mainly clay with negative electricity The Brownian motion of colloidal particles and the hydration on the surface of colloidal particles make colloidal particles have dispersion stability. Among them, electrostatic repulsion has the greatest influence. If coagulant is added to water, it can provide a large number of positive ions and accelerate the coagulation and precipitation of colloid. Compressing the diffusion layer of micelles makes the potential change into an unstable factor, which is also conducive to the adsorption and condensation of micelles. The water molecules in the hydrated film have fixed contact with the colloidal particles and have high elastic viscosity. It is necessary to overcome the special resistance to expel these water molecules. This resistance hinders the direct contact of the colloidal particles. The existence of some hydrated films depends on the electric double layer state. If coagulant is added to reduce the zeta potential, the hydration may be weakened. The polymer materials formed after coagulant hydrolysis (the polymer materials directly added into water generally have chain structure) play an adsorption bridging role between the colloidal particles. Even if the zeta potential does not decrease or does not decrease much, the colloidal particles can not contact each other and can be adsorbed through the polymer chain Colloidal particles can also form flocs.

This precipitate is not suitable for a pigment until it is filtered, dried, crushed, heated to a high temperature, and quenched in cold water. The second heating in a muffle furnace at 725 C produces crystals of the right optical size.

Additional information

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

Demand in the European region has been significantly boosted by higher offtakes in the furniture, building, and industrial sectors compared to Q2, after a boost in containment measures. DIY activities increased significantly as people engaged in more home renovation and building tasks during the extended period of lockdown. With the restart of Chinese shipments in the latter half of Q2 2020, supply has also remained plentiful.

Lithopone was discovered in the 1870s by DuPont. It was manufactured by Krebs Pigments and Chemical Company and other companies.^[2] The material came in different seals, which varied in the content of zinc sulfide. Gold seal and Bronze seals contain 40-50% zinc sulfide, offering more hiding power and strength.^[3] Although its popularity peaked around 1920, approximately 223,352 tons were produced in 1990. It is mainly used in paints, putty, and in plastics.^[1]

0.5% Max

Le Lithopone Alcalin est un pigment blanc formé par le mélange intime en précipitation simultanée de sulfure de zinc et de Sulfate de Baryum. Le lithopone dit normal renferme 29.5% de ZnS et 70.5% de BasSO4 et renferme un peu d'Oxyde de Zinc.

≥99.0