Its sealing edge comes in full contact with the shaft surface in order to provide excellent sealing performance.
(See Figure 3.)
What materials are available?
Operating conditions such as the engine’s temperature, position, size, pressure and shaft speed largely determine which individual oil seal composition is most suitable for every individual application.
Oil seals are made from multiple compounds and materials. Some of the oldest, still in use today, are leather and felt compounds. The trend in mass production, however, has seen a move towards synthetic rubber or elastomers. Nitrile is by far the most popular material but developments in PTFE have created a surge of interest in buyers needing seals for high-speed shaft rotation applications. Viton is taking over from the polyacrylic and silicone, as it works better in high-temperature applications and has a high-resistance to abrasion and harmful chemicals.
The shaft on which the oil seal is mounted has to be ground to a rough surface finish. The shaft also should be hardened to prevent grooves forming on the shaft when the pressure is exerted by the spring on the seal. The area where the seal is fitted also has to be ground to prevent grooves that tend to wear out the lip of the oil seal faster than normal.