polyacrylamide price
Links
As type A with dust lip
Leather
Recommended for abrasive applications
Good running properties, due to the impregnated seal lip
Can be used on shafts which have a surface roughness outside the range for rubber seals
Not suitable for water
Other important factors are ensuring the hardness and roughness of the shaft are correct. A shaft hardness of HRC 45 is recommended for a rubber sealing lip, with a roughness of Ra 0.4-0.8. A higher shaft hardness of HRC 60 and shaft roughness of Ra 0.1-0.4 is recommended for a PTFE lip.
Rubber covered


car oil gasket. If you notice a sudden drop in oil pressure, it is important to have the gasket inspected immediately.
After the oil seal has been installed, check for leaks. You can do this by applying pressure to the system and observing for any signs of a leak, such as fluid escaping from the area where the oil seal is installed. If a leak is present, you may need to remove the oil seal and start the installation process again.
